Hi all

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
tempant
Posts: 1
Joined: Tue Nov 11, 2025
Location: Brussels
Country: Belgium
Nickname: tempant
Laser Machine Make or Type: Sihao KH7050
Laser Power: 80W
Laser Bed Size: 700 x 50
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
LightBurn Version: V1.5.03
Ruida Controller: RDC6442
Windows Version: 10

I just bought a second hand red/black 80W CO2 laser that was in a less than perfect condition. I'm hoping to have the machine up and running again with RD works as software interface. I'm afraid the previous owner hit the 'reset to factory settings' button, so that is one of the issues I hope to solve with the help of this forum.
Top
Post Reply

Return to “New Members - Introduce Yourself First”