Modifying an old Chinese laser

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
frayja2002
Posts: 1
Joined: Sat Feb 14, 2026
Location: NSW
Country: Australia
Laser Machine Make or Type: Chinese no name
Laser Power: 100W
Laser Bed Size: 1.5x1.5 meters
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: 0.0
LightBurn Version: 1.7
Ruida Controller: RDC6442
Windows Version: linux

Hi all

I have been using an old Chinese laser machine that was destined for the scrap heap.
I installed a DSP from LightObject and replaced the 60mm tube folders with 80mm ones which means I have gradually been modifying most of the machine.

When it works, it works well but when it doesn't its a PITA.

Hoping to solve some of my problems here.

Thanks
Alex
Top
Post Reply

Return to “New Members - Introduce Yourself First”