Help locating belt replacements

Hardware settings, adjustments and fixes and other hardware discussion. This includes the "doHICky" Laser Power measurement system by Russ.
Post Reply
KevanDalby
Posts: 11
Joined: Thu Mar 20, 2025
Location: Portsmouth
Country: United Kingdom
Nickname: Kev
Laser Machine Make or Type: Bodor
Laser Power: 90W
Laser Bed Size: 600mm x 500mm
Home Position: BR
Control Software: RDWORKS
RDWorks Version: V8.01.18
LightBurn Version: V2.0.04
Ruida Controller: RDC6445
Windows Version: 11 & Mac OS 15.6.1
Accessories: ~Rotary, ~Fume Extractor, ~CW5000 Chiller, ~mA meter, ~Camera for Lightburn.

Hi all, I am trying to find suppliers for belt replacements for my Bodor BCL-0605MU 90w CO2 laser machine that was purchased in late 2019 and I bought 2nd hand in late 2024. The manufacturer has stopped making and supporting the unit so has been of no help at all. Below is all the info I have been able to get on the current belts but I am looking for a user manual with regards to tensioning the belts and also potential suppliers for belt replacements for all 4 belts. Any help greatly appreciated.👍

Current Belt Information

Right Side Y-Axis:
Width 8mm ( measured as 8.15mm )
Length Approx 1400mm TBC
Type Open Ended
Marking MXL
Profile Trapezoidal ( Flat topped teeth )
Teeth per Inch 12

Left Side Y-Axis:
Width 8mm ( measured as 8.09mm )
Length Approx 1400mm TBC
Type Open Ended
Marking MXL ( Possibly as marking not seen )
Profile Trapezoidal ( Flat topped teeth )
Teeth per Inch 12

X-Axis:
Width 8mm ( measured as 8.06mm )
Length Approx 1600mm TBC
Type Open Ended
Marking MXL
Profile Trapezoidal ( Flat topped teeth )
Teeth per Inch 12

Z-Axis
Width 15mm ( measured as 14.8mm )
Length Approx 3000mm TBC
Type Closed Loop
Marking HTD 3000 3m
Profile Curvilinear (HTD, arc-shaped" teeth
Teeth per Inch 9

I have attached photos of the belts and the callipers are set at 1"
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “General Hardware”