Hi all,
Very excited to find a strong support community for laser cutters!
I'm getting into toy design (mainly wood kits) and just acquired a Ten-High 400x600mm laser cutter to help prototype and maybe do some production parts.
I've been avidly watching Russ's videos and looking through the forums for tips. When I saw that someone had rewritten the RDWorks manual, I realized this was the type of forum I should join! Not a lot I can contribute at this point, but hopefully I can provide some learnings if anything unique comes up.
Cheers from Ontario, Canada!
David
First day new laser cutter
-
David Killing
- Posts: 4
- Joined: Fri Sep 06, 2019
- Location: Ontario
- Country: Canada
- Laser Machine Make or Type: Ten-High GY460
- Laser Power: 80W
- Laser Bed Size: 400mm x 600mm
- Home Position: TL
- RDWorks Version: v8.01.40
- Windows Version: 10
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome David. This is a pretty friendly group - ask questions and poke around I am sure you can find a nugget or two of use and folks will chime in to answer questions.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete