First day new laser cutter

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
David Killing
Posts: 4
Joined: Fri Sep 06, 2019
Location: Ontario
Country: Canada
Laser Machine Make or Type: Ten-High GY460
Laser Power: 80W
Laser Bed Size: 400mm x 600mm
Home Position: TL
RDWorks Version: v8.01.40
Windows Version: 10

Hi all,
Very excited to find a strong support community for laser cutters!
I'm getting into toy design (mainly wood kits) and just acquired a Ten-High 400x600mm laser cutter to help prototype and maybe do some production parts.
I've been avidly watching Russ's videos and looking through the forums for tips. When I saw that someone had rewritten the RDWorks manual, I realized this was the type of forum I should join! Not a lot I can contribute at this point, but hopefully I can provide some learnings if anything unique comes up.

Cheers from Ontario, Canada!
David
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

Welcome David. This is a pretty friendly group - ask questions and poke around I am sure you can find a nugget or two of use and folks will chime in to answer questions.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Post Reply

Return to “New Members - Introduce Yourself First”