Hello to all

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Ramon Navarro
Posts: 1
Joined: Thu Nov 07, 2019
Location: Barcelona
Country: Spain
Laser Machine Make or Type: HL-1060L 130W DSP
Laser Power: 130W
Laser Bed Size: 23" x 37"
Home Position: TL
RDWorks Version: v8
Windows Version: 10

Hello to all, my name is Ramon from Barcelona, Spain.
Setting up my just arrived CO2 laser machine, excited of being a newbie.
All the best, Ramon
Top
Willy Ivy
Posts: 174
Joined: Tue Aug 09, 2016
Location: Pattison, Texas
Country: USA
Nickname: Willy
Laser Machine Make or Type: KH 7050
Laser Power: 60W
Laser Bed Size: 12" x 20"
Home Position: TL
Control Software: LIGHTBURN
RDWorks Version: v8.01.18
LightBurn Version: 1.6.03
Ruida Controller: RDC6442
Windows Version: W7 Pro, W10
Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com)
Contact:
Contact Willy Ivy

Welcome Ramon. Looks like a hoss of a machine. Excited will be an understatement if you really get into it. Have fun with it and do some searching and reading in the forum. If you have not found him already, be sure and look up Russ on youtube with his learning lab videos. Good luck.
PLEASE! ;) CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: :o
Thank You
Willy
Top
Post Reply

Return to “New Members - Introduce Yourself First”