-> Wanted to learn something new so I bought a laser.
-> Have no idea how to use a laser so I'm currently learning through mistakes.... er... experiments.
-> Fell down a YouTube rabbit hole to see if I could maybe mitigate some of those mistakes.
-> Found Russ.
-> Followed Russ here.
-> Blindly created an account and was instructed to tell everyone about me.
-> So... that's pretty much me.
Hi
-
Jacqueline Morgan
- Posts: 1
- Joined: Tue Sep 15, 2020
- Location: San Diego
- Country: United States
- Laser Machine Make or Type: Trotec 300
- Laser Power: 80W
- Laser Bed Size: 29" x 17"
- Home Position: TL
- RDWorks Version: Will check this out.
- Ruida Controller: Other
- Windows Version: 10
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Jacqueline - please take a look at the FAQ section- you will find a few items that may save you problems later.\
Ask a question and someone will chime in.
viewtopic.php?f=107&t=3507
You will find a manual at the link above and I doubt it will be compatible with your software but it may explain a process or two you will find useful - lots of the terminology cross over
Ask a question and someone will chime in.
viewtopic.php?f=107&t=3507
You will find a manual at the link above and I doubt it will be compatible with your software but it may explain a process or two you will find useful - lots of the terminology cross over
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete