Hi

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Jacqueline Morgan
Posts: 1
Joined: Tue Sep 15, 2020
Location: San Diego
Country: United States
Laser Machine Make or Type: Trotec 300
Laser Power: 80W
Laser Bed Size: 29" x 17"
Home Position: TL
RDWorks Version: Will check this out.
Ruida Controller: Other
Windows Version: 10

-> Wanted to learn something new so I bought a laser.

-> Have no idea how to use a laser so I'm currently learning through mistakes.... er... experiments.

-> Fell down a YouTube rabbit hole to see if I could maybe mitigate some of those mistakes.

-> Found Russ.

-> Followed Russ here.

-> Blindly created an account and was instructed to tell everyone about me.

-> So... that's pretty much me.
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

Welcome Jacqueline - please take a look at the FAQ section- you will find a few items that may save you problems later.\
Ask a question and someone will chime in.
viewtopic.php?f=107&t=3507

You will find a manual at the link above and I doubt it will be compatible with your software but it may explain a process or two you will find useful - lots of the terminology cross over
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Post Reply

Return to “New Members - Introduce Yourself First”