Hi everyone, I'm new to the forum and to laser cutters.
I have a self built laser cutter that is not quite finished, but is at the point where it will cut and engrave. My machine has a 1200mm x 600mm bed and a Reci W2 100 watt laser with a Ruida RDC6445G controller. Currently finishing up the build and calibration and looking to learn how to use it.
Thanks
Hi
-
Dave Healey
- Posts: 1
- Joined: Mon Aug 01, 2022
- Location: Manchester
- Country: England
- Nickname: Dave
- Laser Machine Make or Type: Self Built
- Laser Power: 100
- Laser Bed Size: 1200mm x 600mm
- Home Position: BL
- Control Software: LIGHTBURN
- RDWorks Version: 8.01.18
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: CW5200 chiller, 80ltr compressor
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Dave- that should be a fun machine. Let us know if you have questions/problems and we will try to help. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased