Hi

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Dave Healey
Posts: 1
Joined: Mon Aug 01, 2022
Location: Manchester
Country: England
Nickname: Dave
Laser Machine Make or Type: Self Built
Laser Power: 100
Laser Bed Size: 1200mm x 600mm
Home Position: BL
Control Software: LIGHTBURN
RDWorks Version: 8.01.18
Ruida Controller: RDC6445
Windows Version: 10
Accessories: CW5200 chiller, 80ltr compressor

Hi everyone, I'm new to the forum and to laser cutters.

I have a self built laser cutter that is not quite finished, but is at the point where it will cut and engrave. My machine has a 1200mm x 600mm bed and a Reci W2 100 watt laser with a Ruida RDC6445G controller. Currently finishing up the build and calibration and looking to learn how to use it.

Thanks
Top
User avatar
Gene Uselman
Posts: 2181
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Welcome Dave- that should be a fun machine. Let us know if you have questions/problems and we will try to help. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Post Reply

Return to “New Members - Introduce Yourself First”