Fitting a water In / Out temperature sensor with LDC Display!!! Anyone done this?
-
KevanDalby
- Posts: 10
- Joined: Thu Mar 20, 2025
- Location: Portsmouth
- Country: United Kingdom
- Nickname: Kev
- Laser Machine Make or Type: Bodor
- Laser Power: 90W
- Laser Bed Size: 600mm x 500mm
- Home Position: BR
- Control Software: RDWORKS
- RDWorks Version: V8.01.18
- LightBurn Version: V2.0.04
- Ruida Controller: RDC6445
- Windows Version: 11 & Mac OS 15.6.1
- Accessories: ~Rotary, ~Fume Extractor, ~CW5000 Chiller, ~mA meter, ~Camera for Lightburn.
Hi, I have an 80W CO2 laser with Cooler but I would like to display the cooling water temperature going into and comming out of the tube and was wondering if anyone in here has done something similar? Any pointers would be greatly appreciated 
-
Bryan Kelly
- Posts: 66
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
I had done it years ago,,got a flow meter with temp gauge, cut out a spot and installed it,,was reasonable cheap if i remember right,
You do not have the required permissions to view the files attached to this post.