Hi,
Klas joining in from Sweden.
Age: still young and curious, but the family claims I am about to get 50 in a year...
Been planning a diy build for some time now, found Russ videos and found them very informative and intresting.
I am a diy focused person. Built speakers and amplifiers, and got into cnc and related stuff by building a minikossel 3dprinter in 2012 when home with a broken leg. Been building and repairing lots of electronics, speakers and so on.
The biggest issue stopping the laserbuild right now is the limited space in the garage. Witch is occupied by various projects... a rather big metall lathe, a flimsy cheep milling machine, robot mover builds, RC planes and drones and much more...
My profession is in electronics, related hardware, some programming and system engineering. Just received probably one of the first tormach 1100mx into Sweden.
Also into retrofitting an measuerement machine (built by students upon xcarve concept) into a beefed up xcarve machine. Chinese 2kw water cooled spindle with vfd. Beefier steppers, increased mechanical stiffness and so on.
And now also sketching on a laser cutter in fusion360.
Dreaming of a maker space, but i am living in a area where there is none... so I end up gathering the resources myself...
Best regards
Klas
Planning DIY build in Sweden.
-
Klas Malman
- Posts: 5
- Joined: Fri Jul 03, 2020
- Location: Arboga
- Country: Sweden
- Nickname: Malman
- Laser Machine Make or Type: Retrofitted GCC LaserPro Mercury Gen.1
- Laser Power: 70
- Laser Bed Size: ~600x400
- Home Position: TL
- RDWorks Version: C
- Ruida Controller: RDC6445
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Klas- I think you will have fun on this forum as we have a few home builders and a lot of info if you plan to use a Ruida controller. Enjoy and ask any questions you may have. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Klas Malman
- Posts: 5
- Joined: Fri Jul 03, 2020
- Location: Arboga
- Country: Sweden
- Nickname: Malman
- Laser Machine Make or Type: Retrofitted GCC LaserPro Mercury Gen.1
- Laser Power: 70
- Laser Bed Size: ~600x400
- Home Position: TL
- RDWorks Version: C
- Ruida Controller: RDC6445
- Windows Version: 10
Thanks Gene,
There has been a little change of plans, as I stumbled up on an old gcc/laserpro Marcury (gen1) with a fading 25W synrad tube. Has not measured its output yet, but got the dohickey the other week.
Now planning to replace the tube, new psu and new controller. (And new motor drivers, more on that in a separate thread)
There has been a little change of plans, as I stumbled up on an old gcc/laserpro Marcury (gen1) with a fading 25W synrad tube. Has not measured its output yet, but got the dohickey the other week.
Now planning to replace the tube, new psu and new controller. (And new motor drivers, more on that in a separate thread)