premature lasering

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Rich Kehoe
Posts: 1
Joined: Mon Apr 24, 2017
Location: Monroe Michigan
Country: USA
Laser Machine Make or Type: KEHUI
Laser Power: 40
Laser Bed Size: 11 3/4 x 19 5/8
Home Position: TL
RDWorks Version: v8-01-10
Windows Version: 7

I recently had to do a major cleaning and alignment Have been using this machine for 4-5 years I loaded the same file I have been using for all the time before the cleaning and alignment I normally engrave the Granite twice to get a good depth I ran the program I time and it worked perfect I reran it a second time I got a line drag (the laser turned on) burned a line in the granite to the area where it was to engrave and instead of engraving the letters it had engraved originally It treated the area as a rectangle and engraved it solid and I have not been able to engrave anything with out a line being etched in getting to the starting point of my text
Top
Post Reply

Return to “New Members - Introduce Yourself First”